ITEM NAME:Plug and Drive Nitroobd2 Performance Chip Tuning Box for Benzine Cars Nitro A6F5 Plug and Drive Nitroobd2 Performance Chip Tuning Box for Benzine Cars Nitro A6F5 NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car. When it plugged into OBD2 connector, NitroOBD2 receives the information from the car computer ECU. With the received data from ECU NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car NitroOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine. NitroOBD2 finds out the hidden power of your car. NitroOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting NitroOBD2 is very easy to use Plug NitroOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds.And Turn the engine on. NitroOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle,there might not be a need to make an additional adjustment. NitroOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving,and then NitroOBD2 adjusts itself to match your car perfectly. NitroOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map. The main difference between NitroOBD2 Chip Tuning Box and Remapping tuning methods is that NitroOBD2 Chip Tuning Box is easily removable,and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning. Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it. NitroOBD2 is equipped with the engine protection function and 100% safe for your car engine. NitroOBD2 produced on the printed circuit board in SMD technology. NitroOBD2 Chip Tuning Boxes are high quality. color: yellow Mat.Plug NitroOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds.And Turn the engine on. NitroOBD2 settings are optimal and the best for your car. NitroOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving,and then NitroOBD2 adjusts itself to match your car perfectly.
