ITEM NAME:Plug in Power Meter Electricity Analyzer LCD Screen Monitor Voltage Wattmeter AU Product Description Description: Features: Large LCD display, easy to read. Measure voltage, frequency, current, power factor, power, minimum and maximum power, and record accumulated kwh, time, date and electricity charge. Seven display modes are converted by pressing the "function" button. An overload warning is displayed on the LCD. Reset to abnormal display or button not responding. Built in 3.6V rechargeable battery (Ni-MH) to store power and save settings. Easy to set tariffs. Easy to monitor electricity bill: set the price of the built-in backup battery by pressing the OK, value, display and set buttons: 2x1.5v rechargeable battery enables the meter to move and remain visible without losing readings. Measurement of various parameters + overload protection function: power (W), energy (KWH), volt, ampere, Hertz, power factor and maximum power (W), time, days (your electricity charge mainly depends on KWH) large clear LCD easy to read display screen. Specifications: Working voltage: 230V 50Hz for AU plug Working current: maximum 10A for AU plug Wide voltage range: 230V-250V for AU plug Timing display range: 0 seconds ---- 9999 days Power display (W): 0W ---- 3680W Voltage display range: 0V --- 9999V Current display (A): 0.0 ---- 16.0A Frequency display: 0Hz ---- 9999Hz Minimum power display range: 0.0W ---- 3680W Maximum power display range: 0.0W ---- 3680W Total kWh and cost display: 0.000kwh ---- 9999kwh Material: ABS Product size: 15.5 * 7.3 * 7.5cm/6.1*2.87*2.95" Package size: 16 * 8 * 8.5cm/6.3*3.15*3.35" Plug: AU plug Color: white Notes: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-3mm measuring deviation due to manual measurement. Included: 1 X Plug in Power Meter (Use Plug Type According to Your Order) 1 X English Manual.Working current: maximum 10A for AU plug. Plug: AU plug. Seven display modes are converted by pressing the "function" button. An overload warning is displayed on the LCD. Reset to abnormal display or button not responding.
