ITEM NAME:SP108E Wireless Bluetooth Controller APP WS2811 WS2812B WS2801 SK6812 APA10 H5E8 SP108E Wireless Bluetooth Controller APP WS2811 WS2812B WS2801 SK6812 APA10 H5E8 Sync multiple SP108E's together even if the led strips are in Different areas .It only works with 2.4G WIFI network. DON'T use 5G WIFI network. IOS 10/Android 4.4 or later version .Support almost LED IC, such as WS2811,WS2812B, WS2801, SK6812, SK6812-RGBW, WS2813,SK9822,APA102,WS2818, LPD6803, LPD8806, TM1913, UCS1903, SM16703, DMX512,etc. (DO NOT control 5050RGB or RGBW led strip which has no IC ) 180 kinds of multi-color dynamic modes, 8 kinds of single color modes such as meteor, breathing, wave, catch-up, stack, flash, flow, static. Color, brightness and speed are adjustable. The WiFi controller features creative from-image-to-effect function. It can capture the color of image, create distinctive color effect and synchronize light color with atmosphere of your room. MAX 2048 pixels (Recommand 1500Pixels)in total. Save user setting when power off. DC 5V/DC12V/24V wide working voltage; reverse connection protection; hot swap protection Working Temperature: -20~60 Degrees Celsius Working Voltage: DC5V~24V; Working Current: 20mA~130mA; AP Mode Remote Distance: 45FT; Product Weight: 40g; AP (Access Point) mode: Controller and Phone connect directly, controller works as an access point. Connect steps: When the device is not connected to any WIFI network, power on the controller, controller will be remain in Wait-For-Connect mode for 20 seconds; Make sure that your phone is connected to a WIFI network, Open LED Shop APP, pressing the Add Device button, input the WIFI pin code, then press the OK to confirm and wait for the configure processing finish; When controller successfully enter the WIFI network, it will be showed on the device list; User can select the controller and remove it out of the network by pressing the Remove Device button, then the controller will switch into AP mode. color: White Ma.It only works with 2.4G WIFI network. DON'T use 5G WIFI network. IOS 10/Android 4.4 or later version. 1 x SP108E Bluetoot. It can capture the color of image, create distinctive color effect and synchronize light color with atmosphere of your room.
