Item Name: SP5106 Waterproof 6P LED Push Button Switch Panel Box Kit for Car RV Truck Newly. Smart TV Box Android Quad Core HDMI 1080P Wifi Streaming Media Player UK
SP5106 Universal Waterproof Panel Box Kit 6 Gang 12-24V LED Push Button Switch Panel for Car RV Truck Marine Boat Caravan
Feature:
1. Ultra-small panel size (60% smaller than traditional panels).
2. Easy installation-no installation depth, minimum drilling (13x8.5mm/0.51x0.33in).
3. Using a compact, easy-to-access micro USB cable, the end user can replace the cable to any desired length.
4. Flexible wiring-the control relay box is installed at a distance of 1 meter from the touch screen.
5. IP66-strong water jet protection (only applicable to the panel).
6. Indicate LED / 10A self-resetting fuse for each branch.
7. The backlight module is easy to operate in the dark, and the standby current is extremely low (90% lower than the previous model).
8. All buttons can be programmed as instant (ideal horn or wiper application).
Includes a set of various graphic labels and stickers.
Specification:
Product name: 6P membrane panel switch 12-24V universal set
Product model: SP5106
Panel size: 9.1x0.8x7.5cm/3.58x0.31x2.95in
Control box size: 16x9.5x3.2cm/6.3x3.74x1.26in
Packing size: 9.8x6.1x19.9cm/3.86x2.4x7.83in
Product net weight: 303g
Product gross weight: 344g
Product voltage: DC11-30V
Product current: 10A per branch circuit
Panel: PET film touch screen
Circuit protection: Built-in resettable fuse (PPTC)
Switching rating: 10A per branch
Panel rating: Maximum cumulative amplifier: 35A
Rated voltage: DC 11-30V
Protection: IP66 (film panel)
Power terminal: M4 stud size ring terminal
Loading terminal: .250 fast terminal (male)
Installation Notes:
1. Place the provided template on the desired panel position and cut the holes accordingly.
2. From the back of the dashboard, insert the micro USB plug to the front. Connect the micro USB plug to the socket on the back of the panel.
3. Install the panel firmly on the dashboard, and use self-adhesive on the back of the dashboard.
4. Install the control box correctly with the included screws.
Insert the other end of the micro USB cable into the control box. Insert the cable into the strain relief hook on the box.
5. Press the DC positive wire (+) tightly with the included round terminal. Pass wires through the included insulators and connect to screw terminals. Cover the terminals with insulators. Clamp the DC negative wire (-) with an insulated 0.250" female terminal, and insert it into the negative quick terminal on the control box.
Connect the load terminal to the required equipment. The numbers on the top of the load terminals correspond to the numbers on the membrane contact 1 2 3 panel shown on the left.
6. (Momentary button setting) Set a specific button as momentary (press), press the button and the backlight button at the same time for more than 5 seconds, until the button flashes. All buttons can be set to be short-lived. To undo this action (change the button to on-off), simply repeat the process again on the same button.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2mm measuring deviation due to manual measurement.
