Combine dog trainer and wireless electronic fence in one, easy to operate, easy to switch modes, not only can better protect your pet's safety, but also allow your pet to get better training within the limited range.
Note: Please fully charge this product before use, and install the antenna.
Dog trainer and outdoor electronic wireless fence function mode conversion.
1. When the digital display lights up, it is outdoor electronic wireless fence mode, you need to press any right function button to switch to dog trainer mode.
2. When the digital display is not lit, it is the dog trainer mode, you need to press the left outdoor wireless fence signal strength plus or minus button to switch to the outdoor electronic wireless fence mode.
The use of the dog trainer function.
1. The remote control distance of the dog trainer is up to 250 meters.
2. Press the power button to start this product, the red power indicator light will be on for a long time, the digital display will not light up, and the function indicator green light will be on for the dog trainer mode.
3. Independent "alarm", "vibration", and "electrostatic shock" three function button selection.
4. Select "alarm" function, you can press the corresponding function button, if you need continuous alarm training function, press and hold the button until you do not need to train to release.
5. Select "vibration" function, you can press the corresponding function button, if you need continuous alarm training function, press and hold the button until you do not need to train to release.
6. Select the "static" function, you can adjust the static intensity through the static intensity adjustment knob, 0-100 files can be freely adjusted, you can press the corresponding function button, if you need a continuous alarm training function, press and hold the button until you do not need to train to release.
7. Static intensity adjustment will retain the last operation, such as when you will adjust the rotary button to 50 files, after shutdown and restart the product, the static intensity will remain 50 files, if you need to change the gear, directly adjust the knob can be.
Outdoor electronic wireless fence function use method.
1. Outdoor electronic wireless fence with the transmitter as the center, the remote control radius is 150 meters (max).
2. Adjust the signal strength by "+" and "-", according to the 001-100 grade free adjustment, corresponding to the receiver distance of 15-150 meters, that is, 001 grade corresponds to 15 meters, 100 grade corresponds to 150 meters The middle value can be adjusted freely, the signal strength will be shown in the display.
3. Static strength can be adjusted by the static strength knob, 0-100 files can be freely adjusted.
4. After the dog exceeds the set range of activities, its wearing receiver will automatically start the training function, and first vibrate for about 3-5 seconds, then stop vibrating and switch to electrostatic shock for about 3-5 seconds to remind the dog back to the safe area. If the dog continues to move forward, the next vibration for about 3-5 seconds, electrostatic shock for about 3-5 seconds, after the dog feels the vibration warning, will not continue to move forward.
5. If the dog does not listen to the vibration warning or run too fast beyond the wireless fence range, you can switch the transmitter dog training mode to train the dog, the dog back to the wireless fence range switch to electronic wireless fence mode can
6. A transmitter can support multiple receivers working at the same time.
7. The transmitter can work continuously for about 20 hours when fully charged, receiver battery capacity is 1600 mA
8. Charging: DC5V
