Item Name: Tool Kit Watch Press Tool Cover Clamp Replace Replacement Desktop Watch Repair. Size: 23 * 13cm/9.06*5.12"Material: ABS plastics + stainless steelWeight: 550gPackaging: the product is packed in bubble bags and cardboard boxes.Color:BlackOperation steps of conventional gland Watch:1. Find a press with an inner diameter slightly larger than the surface mirror in the press matching press and install it on the lower screw (the two sides of the press are of different sizes and can be used as long as they are suitable).2. Then find a press with an inner diameter slightly smaller than the rear cover and install it on the upper screw.3. After the press is installed, place the watch mirror downward and the back cover upward. After inspection, press it down with appropriate force (there is a notch on the back cover that should be aligned with the handle bar, otherwise the handle bar may be broken).Please refer to the instructions on the package for specific use.Note: the gland should be slightly larger than the mirror, otherwise the mirror will be crushed. If the back cover is transparent, the inner diameter of the upper gland should be slightly smaller than the diameter of the back cover but larger than the glass of the back cover.Package:1 Watch Press Tool with 12 Dies *Please make
