ITEM NAME:Top Entry CPU Coin Acceptor Coin Selector For Arcade & Slot Vending Machine Description: Suitable for a variety of coins CPU process control, and accurate scoring Special precision/normal stall, coins smoother Pulse output available widths Prevent phishing and other means of cheating,cheat alarm Wire part of the whole SMT technology, quality and stability Easy to set up and operation Specification: Wiring instructions: Gray line: code table Red line-DC + 12V White line -COIN signal black line - ground wire Working temperature: -15 ℃ ~ +60 ℃ Acceptable coin diameter :: à ¤18mm ~ à ¤30mm Can receive coin thickness: 1.5mm ~ 2.4mm Power supply voltage: DC 12V  ± 10% Standby current: 60mA Working current: 650mA Load capacity: 500mA Signal output mode: NC. (Normally closed) / NO. (Normally open) Instructions: 1〠Adjustment on the rear panel of the metal, the diameter is too large to prevent miscarriage of tokens. 2〠Take out the plastic coin from the slot, put our coin in. 3〠Depending on your motherboard choice COIN signal output mode(normally closed/normally open). Usually use the NC stall. 4〠Depending on your motherboard to select the output pulse switch(20ms/40ms/100ms). Usually 20ms stall. 5〠Based on your currency, select the sensitivity. If you require the ability to identity strong. The sensiivity switch to "accurate" if the coin error, occurred during part of the coin mistaken for real currency counterfeiting. You will need to switch sensitivity "normal". 6〠Coin is installed,connect the power lines and signal lines can be used. Then put on your use of the reference currency. Package Includes: 1 PiecexCoin Selector 1 PiecexWire 1 PiecexManual 10 PiecexScrew accessories.1 PiecexCoin Selector. Pulse output available widths. 4〠Depending on your motherboard to select the output pulse switch(20ms/40ms/100ms). Usually 20ms stall. 2〠Take out the plastic coin from the slot, put our coin in.
