Lock Size:(L) x (W) 9.3 x 3.7 x 1.5cm /3.66" x 1.46" x 0.59"(appr.)
Usage Instructions:
UNLOCK
1. Enter the factory user password "1234+OK" or enter the factory management password "4321+OK"
2. Buzzer: Beep... one long sound, the unlocking indicator light is always on
3. Turn the knob to the OPEN position within 3 seconds.
* The password is wrong "Beep...Beep...Beep..." three sounds
* The battery indicator is always on and the battery is out of power.
Note: After the management of cotton and linen is unlocked, the user password will be automatically restored to the factory password: 1234
LOCKED
1. Turn the knob to the LOCK position
User Settings:
1. Modify the factory password (for example, change to 123123)
a. Modify the factory user password "1234+OK" button, or modify the factory management password "4321+OK" button, the buzzer "beep..." a long sound, the unlocking indicator light is always on
b. Press and hold the OK button again for more than 2 seconds, the unlock indicator light is always on.
c. Enter the new password "123123+OK" button, beep... one long sound, the password is successfully modified.
* The password length can be set to 4-15 digits. The management password and user password cannot be set to the same password.
2. Enable public mode, set temporary password
Enable public mode
a. Enter the correct management password “****+OK” button, buzzer “beep...” for a long tone, and the unlock indicator light is always on.
b. Press and hold the OK button again for more than 2 seconds. The unlock indicator flashes, press the OK button again.
c. Enter the number "4, 4" Press the "OK" button, beep... a long sound
Set a temporary password
a. Press the OK button and the unlock indicator will flash.
b. Enter 4~15 digits to be set.
c. Press the OK button, the buzzer “beep...” will be a long sound, the unlocking indicator will be on and unlock to store the item. The temporary password is set successfully. After entering the standby state, the electronic lock unlock indicator will flash once every 3 seconds.
* Temporary password can only be valid once, and will automatically expire after use.
3. Turn off the public mode
a. Enter the correct management password “****+OK” button, the buzzer “beep...” will be a long sound, and the unlocking light will be on.
b. Press and hold the “OK” button again for more than 2 seconds. The unlocking light flashes, press the OK button again.
c. Enter the number "4,3" and press the "OK" button, beep... one long sound
4. Enable/disable the f ake password function
a. Enter the correct management password “****+OK” button, the buzzer “beep...” will be a long sound, and the unlocking light will be on.
b. Press and hold the OK button again for more than 2 seconds, the unlock button flashes, press the OK button again.
c. Enable input “4, 2” and press “OK” button, beep... one long sound; close input “4, 1” and press “OK” button, beep... one long sound.
* When the password is enabled, you can enter the garbled before/after the correct password to mask the real password when you enter the password to prevent others from peeking.
Password Error Alarm:
Continuously enter the wrong password four times for malicious trial unlocking, the keyboard will be locked for 60 seconds, and an alarm tone will be sounded.
