ITEM NAME:Universal Chrome Stainless Steel Car Rear Round Exhaust Muffler New Pipe Ta Features Size: 14*6.5cm Diameter of interface: 6.3cm Outlet diameter: 8.5 cm Suitable for vehicles with 1.8-2.2 exhaust straight tail throat Straight type: If the emergency vehicle type is not less than the following table but the exhaust pipe is straight, it can be installed if the outside diameter is not more than 5.8cm or less than 3cn. To determine whether the tail throat is suitable: The inner diameter of the tail throat joint is 63MM. Parents can measure the outer diameter of the exhaust pipe of the car, which is less than 58MM. Use. Installation method: The screw connection mode is adopted. After loosening the screw on the tail pipe, the tail pipe is sleeved in the proper position at the tail of the automobile exhaust pipe, and then the screw is tightened with a wrench. It only takes 5 minutes to do it by yourself. Reminder 1. The distance between the tail throat and the bumper should be more than 2 cm in order to avoid the high temperature burn of the tail gas on the bumper. 2. When installing, please wear gloves in case of minor injury. 3. Please do not install this product when the car has just stopped or started, so as not to burn the exhaust pipe. Products include: 1X automobile exhaust pipe.The screw connection mode is adopted. It only takes 5 minutes to do it by yourself. The distance between the tail throat and the bumper should be more than 2 cm in order to avoid the high temperature burn of the tail gas on the bumper.
