{"product_id":"universal-duplicator-copy-remote-control-for-pt-sc-lx-hx-ht-series-433mhz","title":"Universal Duplicator Copy Remote Control for PT\/SC\/LX\/HX\/HT Series 433MHz","description":"\u003cp\u003eItem Name: Universal Duplicator Copy Remote Control for PT\/SC\/LX\/HX\/HT Series 433MHz. Smart TV Box Android Quad Core HDMI 1080P Wifi Streaming Media Player UK\n\u003cbr\u003e\t\t\t\t\u003c\/p\u003e\n\n\u003cp\u003eWireless\n\u003cbr\u003eCopy Remote Control UniversalCopy Remote forPT\/SC\/LX\/HX\/HT\n\u003cbr\u003eSeries433MHz\u003c\/p\u003e\n\n\u003cp\u003eCloning chip types:\u003c\/p\u003e\n\n\u003cp\u003e\t2260(PT2260,\n\u003cbr\u003eSC2260, LX2260, HX2260)  2262(PT2262, SC2262, LX2262, HS2262, HX2262)  PT2264,\n\u003cbr\u003ePT2240(LX2240)  1527(EV1527, HS1527, HX1527)  FP527, CS5211, SMC918, SMC926,\n\u003cbr\u003eAX5026, AX5326-3, AX5326-4, HT600, HT680, HT6207, HT6010, HT6012, HT6013,\n\u003cbr\u003eHT6014, HT12D, HT46F49E, PIC16F629, PIC16F630 etc.\n\u003cbr\u003eNote: Besides the above chips, it can also clone part of HCS101, HCS200 and\n\u003cbr\u003e201, HCS300 and 301. However, cloning rolling chips is normally not\n\u003cbr\u003erecommended. Because there are many uncertainties during cloning rolling chips.\u003c\/p\u003e\n\n\u003cp\u003eUse steps:\n\u003cbr\u003e1. Clear code: two fingers at the same time hold the unlock key and lock key \n\u003cbr\u003ethe LED light rapidly flashes 3 times in about 2 seconds  let one of the\n\u003cbr\u003efingers go (the other hand can not let go), and then use the loose finger to\n\u003cbr\u003equickly click three times on the loose button until the LED light flashes\n\u003cbr\u003equickly  the two fingers can release  then press any one key of the remote\n\u003cbr\u003econtrol  when LED light goes off, it means clear code is successful(four keys\n\u003cbr\u003eall empty)  if after you press any button of the remote control, the light is\n\u003cbr\u003estill on, it indicats that the original code has not been cleared successfully.\n\u003cbr\u003eYou need to re-clear, and only successfully clearing the code can cloning be\n\u003cbr\u003esuccessful. You can repeatedly clear and clone the code.\u003c\/p\u003e\n\n\u003cp\u003e2. Copy: left hand taking the original remote control, right hand taking our\n\u003cbr\u003ecloned remote control and keep two remote control as close as possible  press\n\u003cbr\u003ethe first keys of two remote controls at the same time  in about 2 seconds, the\n\u003cbr\u003eLED light will flash quickly 2 times  after one second, the indicator light\n\u003cbr\u003ekeeps flashing and let go of your fingers  and then press the key after\n\u003cbr\u003esuccessful study, the light keeps on, which means that the first key code on\n\u003cbr\u003eoriginal remote control has been copied to the other remote control  the same\n\u003cbr\u003emethod can be used in turn on the second key, the third key... If the copy is\n\u003cbr\u003esuccessful, the remote control function is the same as the original matching\n\u003cbr\u003eremote control.\u003c\/p\u003e\n\n\u003cp\u003e3. Restore: When you accidentally clear the copy of the remote control code,\n\u003cbr\u003eyou can simultaneously press the copy of the remote control of the bottom two\n\u003cbr\u003ekeys, LED lights will flash quickly, let go after pressing any key, light long,\n\u003cbr\u003ethis Indicating that the code for the remote control is restored. Before using\n\u003cbr\u003eour duver remote control, please be sure to remove the existing code from the\n\u003cbr\u003eremote control.\u003c\/p\u003e\n\n\u003cp\u003e4. How to deal with the situation where some of the keys can control, the rest\n\u003cbr\u003ecan not control? You can use clear and restore operation, the specific\n\u003cbr\u003eoperation is as follows:\n\u003cbr\u003e(1) first clear code \n\u003cbr\u003e(2) after clearing code, copy the unsuccessful key again, and there is no need\n\u003cbr\u003eto copy the rest buttons \n\u003cbr\u003e(3) and then clear the code again \n\u003cbr\u003e(4) restore code  at this time, the original keys that were not successfully\n\u003cbr\u003ecopied are now covered by new codes, and the original keys that were\n\u003cbr\u003esuccessfully copied are now retained. If there is no copy after the second copy\n\u003cbr\u003eof the keys, repeat the above steps again and again until all keys are\n\u003cbr\u003esuccessfully copied.\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\n\u003cbr\u003eRated voltage: 12V\n\u003cbr\u003eRated current: 10mA\n\u003cbr\u003eProduct weight: about 20g\n\u003cbr\u003eInstallation: Wireless\n\u003cbr\u003eCorresponding frequency: 433MHz\n\u003cbr\u003eModulation: ASK (amplitude modulation)\n\u003cbr\u003eWireless transmitting distance: 50-100m (open space)\n\u003cbr\u003eScope: garage doors, alarm, automatic doors, shutter doors, and so on\u003c\/p\u003e\n\n\u003cp\u003ePrecautions:\n\u003cbr\u003e1. Select the remote control of the prerequisite: the original remote control\n\u003cbr\u003efunction is normal, remote control chip is the same or compatible, remote\n\u003cbr\u003econtrol operating frequency the same.\n\u003cbr\u003e2. The remote control can only copy the fixed code, learn the code chip and\n\u003cbr\u003epart of the single-chip remote control (can copy the chip model see copyable\n\u003cbr\u003echip type).\n\u003cbr\u003e3. Two-way remote control, rolling code remote control, single-chip encryption\n\u003cbr\u003eprogram remote control can not be copied. Such as HCS200, HCS201, HCS300,\n\u003cbr\u003eHCS301 and so on.\n\u003cbr\u003e4. Before copying the remote control, make sure that the existing code on the\n\u003cbr\u003eremote control has been cleared and check that the code is cleared\n\u003cbr\u003esuccessfully. Otherwise, it can not be copied.\n\u003cbr\u003e5. Please ensure that your remote control has enough power, the distance\n\u003cbr\u003ebetween the two remote control the better! If the copy distance is too close to\n\u003cbr\u003ethe switch at different angles to copy. Press and hold the button on the\n\u003cbr\u003eoriginal remote control to send the signal completely normal, and then press\n\u003cbr\u003ethe button on the remote control to ensure that the function is completely\n\u003cbr\u003ecopied.\n\u003cbr\u003e6. This note is all B procedures for the unified use of the remote control\n\u003cbr\u003einstructions, not for each style dedicated to a description of all duody remote\n\u003cbr\u003econtrol operation methods are basically the same, please be flexible, reference\n\u003cbr\u003eto use, do not know can consult in advance. You can also refer to our copy of\n\u003cbr\u003ethe remote control operation demonstration video operation.\u003c\/p\u003e","brand":"Shop2IndiaBei5","offers":[{"title":"Default Title","offer_id":43092285554856,"sku":"U2I-4-403814794813","price":2149.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0300\/1588\/1354\/products\/s-l1200_988daaaf-4fe4-4080-89a4-8abe6e0a4f94.jpg?v=1673954863","url":"https:\/\/shop2india.com\/products\/universal-duplicator-copy-remote-control-for-pt-sc-lx-hx-ht-series-433mhz","provider":"SHOP2INDIA GATEWAY","version":"1.0","type":"link"}