Item Name: Vacuum Solder Suction Pen Hand Cleaning Tool Desolder Pump Desoldering Tool. Scope of application: Tin removal Color: BlackRange of temperature regulation: 300 100% brand new and high qualityNet weight: approx. 70g Length: approx. 210mmMaterial: Plastic Maximum suction: 35 cm-HgOperation Manual:1. Put the tin suctioner piston downward pressure to get stuck. 2. Heating solder joints to solder melting with electric soldering iron. 3. Remove the iron and quickly put the tin suctioner resistance paste solder, solder sucker and press the button. 4. If It is not clean at one time and can be repeated many times. Using skills:1. To ensure good solder sucker piston seal. Before electricity, with your fingers to plug hole solder sucker head, solder sucker head to press the button, if the piston is not easy to pop into place, that the seal is good. 2. The aperture tin suctioner heads are of different sizes, select the appropriate specifications. 3. Tin suctioner head wears, should replace the new one. 4. Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity. 5. Head contact pads are slightly longer, when solder melts, the solder joint pin as the center, then hand out in a clockwise direction to draw a circle, and then press the button tin suctioner. Notice:1. The real color of the item may be slightly different from the pictures shown on the website caused by many factors such as brightness of your monitor and light brightness.2. Please allow slight manual measurement deviation for the data. Thank for your understanding.3. 1cm=0.39''. Package List:1x Desoldering Pump *Please make
