W1411 Digital Thermostat Temperature Humidity Controller Egg Incubator

ITEM NAME:W1411 Digital Thermostat Temperature Humidity Controller Egg Incubator Product Description Description: Description: The product adopts single chip control system + high-precision temperature probe, and its temperature control performance and temperature control accuracy are superior to similar products. The product has three window design, real-time start value and stop value, and has intermittent work, timing switch and other functions. It can be widely used in greenhouse cultivation, aquaculture, room temperature control and other aspects. It is a good help at home. Specifications: Size: 90x60x25mm/3.54x2.36x0.98" Material: ABS + electronic components Model and specification: XH-W1411 Temperature range: - 55 ~ + 120℃ Temperature measurement accuracy: Â ± 0.3 Â ° Resolution: 0.1 Â ° Temperature range: - 19-99Â °C Control accuracy: 1 Â ° Temperature probe: 1 meter waterproof probe Power supply voltage: 220V Applicable environment: - 25-55 ℃ humidity 20% - 85% (no condensation) Output type: 10 relay outputs Instructions: 1.The plug product of the house socket on the screen shows the temperature at which the power supply is properly connected 2. Set the start and stop temperature of the temperature control probe where the temperature needs to be controlled. 3. The power plug of heating or cooling equipment on the thermostat plug can be realized through temperature control. An instruction manual: If the temperature is within the interval after the power increase, the output will activate immediately and the set point will stop. Start temperature < stop temperature: heating mode. For example, to control the hot water stop at 60 ℃ and restart at 45 ℃, the start value must be 45 and the stop value must be 60℃ Start temperature > stop temperature: cooling mode For example, when you want to control the greenhouse above 35℃ in summer to start the ventilation fan, when it stops at 32℃, you must set the start to 35℃ and the setting to 32℃. Game: function key / TOGGLE key In t.Temperature correction: disconnect the plug of the temperature regulator and keep the set unchanged. Enter the temperature correction function. Start temperature > stop temperature: cooling mode. Start temperature < stop temperature: heating mode.