Parameters:
Product Name: Microcomputer digital temperature controller
Specification model: XH-W1316
Temperature control range: -50~110C
Temperature measurement accuracy: + / - 0.1C
Refresh rate: 5 times per second
Input voltage: DC 12V
Measurement input: 10K-3950 NTC waterproof sensor
Side output: Two-way relay output
Size: 82 x 58 x 30mm
| Code |
Code description |
Setting range |
Factory setting |
| P1 |
Operating mode |
C/H |
H |
| P2 |
Backlash setting |
0-30°C |
2 |
| P3 |
Temperature difference setting |
5-50°C |
OFF |
| P4 |
Setting range upper limit |
-45~110°C |
110 |
| P5 |
Setting range lower limit |
-50~105°C |
-50 |
| P6 |
Temperature correction |
-7~+7°C |
0 |
| P7 |
High temperature alarm |
-50~125°C |
OFF |
To set the values of F3 and F7, you need to set it to ON first, then press the set button to enter the setting.
F1: working mode
H: indicates that the current work is in the heating mode. C: indicates that the current work is in the cooling mode.
F2: Hysteresis setting
Hysteresis = temperature control maximum - minimum Example: need to control the temperature of 35 ~ 40 °, then the difference is 5 (40 - 35 = 5, so the hysteresis is set to 5)
F3: Temperature difference setting
A set of temperature difference can be set. When the first level red light is on, the difference between the real-time temperature and the stop temperature is greater than the set value of F3. At this time, the second level red light is on, and two devices are activated. When the difference between the real-time temperature and the stop temperature is less than the set value of F3, the second level red light does not light, and the second relay has no output.
F4: Set upper temperature limit (no need to set)
F5: Set the lower temperature limit (no need to set)
F6: Temperature calibration
When there is an error between the displayed temperature measurement value and the actual temperature, it can be corrected by this function. The corrected value will be automatically added to the real-time temperature. The current display temperature=last display temperature + correction value
F7: High temperature alarm
When the temperature is higher than this set value, the digital tube flashes
Package includes:
1 x Microcomputer digital temperature controller
