Specification:
| Brand |
XINDA |
| Model |
XD8613 |
| Material |
Forged Aluminum Magnesium |
| Weight |
413g |
| Size |
8.2 x 15cm / 3.23 x 5.9inch |
| Tension |
Statin: 24KN(2400KG) Rolling: 12KN(1200KG) |
| Color |
Red |
Features:
- Rating to 24kN for high durability to satisfy all your requirements, like pulling a standed boat,hauling some out of a crevass, etc.
- Compatible with wide range of ropes up to 16mm (5/8"). Multiple anchors for complex rescue / hauling system setup.
- Half round holes to evenly bear load pressure. Concave pulley with polished surface to enhance smoothness.
- Division board in the middle to avoid strings winding together. Safer.
Note:- Check the pulley if resist any crack, deform, corrosion. Check if the pulley able to work smoothly.
- Check if the side board exist deformation. Check if the pulley rub with side board.
- Before using the system with forward stop, check if the rope is properly installed and
test the forward stop system (check if the rope is stuck in the correct direction).
- When using a directional pulley at that time, depending on the angle caused by the
rope, carefully add to the gravity of the pulley (and its determined point).
- An accident can result in the disposal of the product after a single use,
depending on the type and density of use and the environment in which it is
used (severe environment, sharp edges, extreme weather, chemical products, etc.).
- In addition to checking before or during use, it is necessary to conduct in-depth
inspections by senior inspectors on a regular basis. The frequency of in-depth
inspections depends on the type of regulations and the type and intensity of use.
- Store the product in a dry and away from UV light, chemicals, extreme temperatures, etc.
If necessary, clean and dry the product.
Package Included:
1 x XINDA Pulley
